Skip to content
St Marys cottage disconnected before demolition
Level 2 electrical

Power Disconnection and Reconnection Penrith

The supply made safe at the network while trades work, or removed for good before the excavator arrives.

Get a free quote

Takes a minute. We'll call you back, usually the same day.

No obligation. Your details stay with us and are never sold or shared.

The main switch turns off your circuits, but the line, the raiser and the mains to the meter board stay live. If anyone is going to work near them, or the house is coming down, the supply has to be isolated at the network side. Across Penrith City, that need comes up with re-roofs, renders, renovations, shed and carport builds, switchboard upgrades and knockdown rebuilds.

Re-roofs and renders

Older Penrith homes are trading tiles for metal, and brick for render. Roofers working around the raiser and renderers on scaffold near the bracket need the supply isolated. We disconnect for the days they need, then reconnect, and if the raiser has seen better days, we replace it at reconnection with a point of attachment upgrade.

Knockdowns

Before demolition, the supply is permanently disconnected and the service removed. We book it before the demolition date and can set up a temporary builders supply on the same visit.

Acreage work

On acreage, sheds, pumps and second dwellings are often on separate private lines. Sometimes only part of the property needs isolating, for example where a new shed is going up near a private line. We check how the supply is arranged before booking.

Switchboard upgrades

When your electrician replaces the switchboard or main switch, the network supply has to be isolated. We coordinate so it’s all done in one day.

Heat and medical needs

Penrith summers make a long outage miserable. We can schedule disconnections for early morning and keep them short. If anyone relies on powered medical equipment, tell us when booking.

Temporary or permanent

  • Temporary: supply off for the work, then reconnected and tested
  • Permanent: supply removed before demolition

Paperwork

Builders often need written confirmation of isolation for their safety plan. We provide the date, time and point of isolation.

For trades

We work with Penrith roofers, builders and electricians every week. Send us the address, the work and your dates.

On the day of the disconnection

We arrive at the agreed time and talk to whoever is on site about exactly what they’ll be doing and for how long. We confirm how the supply is arranged, isolate it at the right point, and make the line or cable safe so it can’t be accidentally re-energised. The trades get a clear message that the supply is dead and when we’ll be back. For demolitions, the service is removed altogether and the network side left safe for machinery.

On the day of the reconnection

Before restoring power, we look over the work around the supply. Is the raiser still sound and straight? Have the mains been damaged? Does the new roof, render or carport still leave the line at a legal height? If anything has changed, we explain it and price the fix before going further. Once we’re satisfied, we reconnect, test, and give you the certificate of compliance.

Shared and acreage supplies

On older subdivisions, battle-axe blocks and some acreage, one supply can feed more than one dwelling, or a private line can carry power to a neighbour’s shed. We trace the arrangement before booking so nobody is surprised by an outage, and we can give you a written notice for tenants or neighbours.

Sheds and carports going up

Building a shed or carport close to an overhead or private line? The builders may need it isolated while the frame and roof go on, and the finished structure has to leave the line at a legal height. We can check the clearance before the build starts and isolate the supply for the critical days.

Book it in

Call the level 2 electrician Penrith team. For an immediate safety issue, our emergency level 2 electrician line runs 24/7.

Updated

Pricing depends on overhead, underground or private-pole supply, single or three phase, temporary or permanent, and the number of visits. We confirm on the phone or on site.

What good power disconnection and reconnection looks like

Close-up of power disconnection and reconnection on a home in the Penrith area
What power disconnection and reconnection looks like up close on a typical Penrith area home.
Signs that power disconnection and reconnection needs attention
Typical signs that it needs attention.

Power Disconnection and Reconnection in Penrith: step by step

  1. Set the dateWe agree timing with your builder, roofer or electrician.
  2. Lodge with EndeavourNotification lodged before any work on the supply.
  3. IsolateDisconnected at the pole, pit, private pole or attachment and made safe.
  4. Reconnect or removeReconnected and tested, or removed for demolition.

Power Disconnection and Reconnection questions in Penrith

Something else on your mind? Call 02 9158 9998 and ask.

We need the power off at a shed on our acreage, not the house. Can you do that?

If the shed is on its own private line, it can often be isolated separately. We check how your property is wired before booking.

The roofers start in a heat wave. Can you keep the outage short?

Yes. We can disconnect first thing and reconnect as soon as they're clear of the line, and we'll plan around any medical needs.

Does the demolition company do the disconnection?

No. It has to be an accredited Level 2. Most demolition crews book us or ask you to.

Need a Level 2 electrician in Penrith?

📞 Call now Free quote